To convert from crib mode to bassinet mode, follow these steps:

  1. Remove the bedding (mattress, cover and fitted sheet).

  2. Attach the metal brackets to the bassinet leg using 4 (C) bolts. 

  3. Assemble the bassinet support by attaching the bassinet base to the bassinet legs using 8 (C) bolts. 

  4. Place the bassinet support on the mesh tensioner and raise the top flap. 

  5. Place the bassinet mesh inside the crib. Align the seam on the crib mesh mesh with the seam on the bassinet mesh.

  6. Attach the bassinet mesh securely to the velcro. Then close the flap and attach it to the velcro on the bassinet mesh. 

  7. Place the bedding (mattress, cover and fitted sheet) on top of the mattress support. 

  8. Then press the mattress firmly down on all edges and corners to make sure that the mattress is not raised on the sides.

That’s it, you are done. Your bassinet is ready!