To convert from bassinet mode to crib mode, follow these steps:                    

  1. Remove the bedding (mattress, cover and fitted sheet). 

  2. Open the flap. For removing the bassinet mesh, detach the bassinet mesh velcro as shown below.

  3. Once the bassinet mesh is free on all sides, remove it from the crib. 

  4. Close the crib mesh flap. Remove the bassinet support.

  5. Disassemble the bassinet support and place it back in the box. 

  6. Place the bedding (mattress, cover and fitted sheet) on top of the mesh tensioner. 

  7. Press the mattress firmly down on all edges and corners to make sure that the mattress is not raised on the sides.                            

You are done. The crib is ready! 

To convert from crib mode to bassinet mode, follow these steps:

  1. Remove the bedding (mattress, cover and fitted sheet).

  2. Attach the metal brackets to the bassinet leg using 4 (C) bolts. 

  3. Assemble the bassinet support by attaching the bassinet base to the bassinet legs using 8 (C) bolts. 

  4. Place the bassinet support on the mesh tensioner and raise the top flap. 

  5. Place the bassinet mesh inside the crib. Align the seam on the crib mesh mesh with the seam on the bassinet mesh.

  6. Attach the bassinet mesh securely to the velcro. Then close the flap and attach it to the velcro on the bassinet mesh. 

  7. Place the bedding (mattress, cover and fitted sheet) on top of the mattress support. 

  8. Then press the mattress firmly down on all edges and corners to make sure that the mattress is not raised on the sides.

Voila!